SLG47513 Datasheet | Renesas

Description The SLG47512/13 provides a small, low voltage and low power ponent for monly used mixed-signal functions. The user creates their circuit design by programming the one time programmable (OTP) Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins, and the macrocells of the SLG47512/13. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit. Key Features - Two High Speed General Purpose Analog parators (ACMPx H) - Integrated Voltage References (Vref) - Fifteen bination Function Macrocells - Three Selectable DFF/LATCH or 2-bit LUTs or Shift Registers - One Selectable Programmable Pattern Generator or 2-bit LUT - Ten Selectable DFF/LATCH or 3-bit LUTs or Shift Registers - One Selectable DFF/LATCH or 4-bit LUTs or Shift Register - Eight Multi-Function Macrocells - Seven Selectable DFF/LATCH or 3-bit LUTs + 8-bit Delay/Counters - One Selectable DFF/LATCH or 4-bit LUT + 16-bit Delay/Counter - Serial munications - I2C Protocol Interface - Programmable Delay with Edge Detector Output - Deglitch Filter or Edge Detector - Two Oscillators (OSC) - 2.048 k Hz Oscillator - 25 MHz Oscillator - Analog Temperature Sensor - Power-On Reset (POR) with CRC Check - Read Back Protection (Read Lock) Applications - Notebook and Tablet PCs - Smartphones and Fitness Bands - Personal puters and Servers - PC Peripherals - Consumer Electronics - Data munications Equipment - Handheld and Portable Electronics - Power Supply - 1.0 V ≤ VDD ≤ 1.65 V - Operating Temperature Range: -40 °C to 85 °C - Ro HS pliant/Halogen-Free - Available Package - 12-pin STQFN: 1.6 mm x 1.6 mm x 0.55 mm, 0.4 mm pitch - 16-pin MSTQFN: 1.6 mm x 1.6 mm x 0.55 mm, 0.4 mm pitch CFR0011-120-00 Revision 3.0 1 of...