SLG47001 Datasheet | Renesas

Features The SLG47001/03 provides a small, low power ponent for monly used analog signal processing and mixed-signal functions. Individual, tunable, analog ponents used in conjunction with configurable logic provide a way to solve a wide variety of tasks with minimal costs. The user creates their circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the macrocells, and the IO pins of the SLG47001/03. Features - Two Operational Amplifiers (Op Amp) with Ultra-low Power Consumption - Rail-to-Rail Input and Output (RRIO) - Ultra-low Offset Voltage - Zero Offset Voltage Drift - Integrated Voltage Reference (VREF) - Multi-channel Sampling Analog parator (MS-ACMP) - Sampling up to Six Analog Channels - Selectable Voltage Reference for Each Channel - Different Sampling Scenarios - Synchronous or Asynchronous Result Appearance - Range parator Mode - Two 1024-Position 100 kΩ Digital Rheostats - Potentiometer Mode - I2C and Manual Control Options - Extended Pattern Generator (EPG) - Width Converter Option - 8-bit Parallel Data Output - Optional 1x 8-bit, 2x 4-bit, 4x 2-bit, or 8x 1-bit Serial Bitstream Output - 59 Bytes Pattern Stored in NVM - 11 bination Function Macrocells - Two 2-bit LUTs or DFF/LATCHs - Four 3-bit LUTs or DFF/LATCHs with Reset/Set - Four 3-bit LUTs, DFF/LATCHs, or Shift Registers - One 4-bit LUT or DFF/LATCH with Reset/Set - Five Multi-Function Macrocells - Four Selectable DFF/LATCHs or 3-bit LUTs + 8-bit Delay/Counters - One Selectable DFF/LATCHs or 3-bit LUT + 8-bit Delay/Counter/FSM - Programmable Delay with Edge Detector Output - Two Oscillators (OSC) - 2.048 k Hz/10 k Hz Oscillator with Ultra-low Current Consumption - 25 MHz Oscillator - One Single-Pole/Single-Throw Analog Switch - Analog Temperature...