Datasheet4U Logo Datasheet4U.com

M29W800AT - 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Low Voltage Single Supply Flash Memory

Description

The M29W800A is a non-volatile memory that may be erased electrically at the block or chip level and programmed in-system on a Byte-by-Byte or Word-by-Word basis using only a single 2.7V to 3.6V VCC supply.

For Program and Erase operations the necessary high voltages are generated internally.

Features

  • h-4FFFFh 40000h-47FFFh 38000h-3FFFFh 30000h-37FFFh 28000h-2FFFFh 20000h-27FFFh 18000h-1FFFFh 10000h-17FFFh 08000h-0FFFFh 00000h-07FF.

📥 Download Datasheet

Datasheet Details

Part number M29W800AT
Manufacturer STMicroelectronics
File Size 234.79 KB
Description 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Low Voltage Single Supply Flash Memory
Datasheet download datasheet M29W800AT Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M29W800DB 3V supply flash memory Numonyx
M29W800DT 3V supply flash memory Numonyx
M29W800FB 8-Mbit Boot Block 3 V Supply Flash memory Numonyx
M29W800FT 8-Mbit Boot Block 3 V Supply Flash memory Numonyx
M29W064FB 64-Mbit 3V supply flash memory Numonyx

Other Datasheets by STMicroelectronics

Part Number Description
M29W800AB 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Low Voltage Single Supply Flash Memory
M29W800B 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Low Voltage Single Supply Flash Memory
M29W800D 8 Mbit (1Mb x8 or 512Kb x16 / Boot Block) 3V Supply Flash Memory
M29W800DB 8 Mbit (1Mb x8 or 512Kb x16 / Boot Block) 3V Supply Flash Memory
M29W800DT 8 Mbit (1Mb x8 or 512Kb x16 / Boot Block) 3V Supply Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M29W800AT M29W800AB 8 Mbit (1Mb x8 or 512Kb x16, Boot Block) Low Voltage Single Supply Flash Memory s 2.7V to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 80ns PROGRAMMING TIME: 10µs typical PROGRAM/ERASE CONTROLLER (P/E.C.) – Program Byte-by-Byte or Word-by-Word – Status Register bits and Ready/Busy Output 1 44 s s s s s s SECURITY PROTECTION MEMORY AREA INSTRUCTION ADDRESS CODING: 3 digits MEMORY BLOCKS – Boot Block (Top or Bottom location) – Parameter and Main blocks TSOP48 (N) 12 x 20mm SO44 (M) FBGA s s BLOCK, MULTI-BLOCK and CHIP ERASE MULTI BLOCK PROTECTION/TEMPORARY UNPROTECTION MODES ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend LFBGA48 (ZA) 8 x 6 solder balls s Figure 1.
Published: |