Datasheet Details
| Part number | M74ACT574B |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 77.88 KB |
| Description | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING |
| Download | M74ACT574B Download (PDF) |
|
|
| Part number | M74ACT574B |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 77.88 KB |
| Description | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING |
| Download | M74ACT574B Download (PDF) |
|
|
|
The ACT574 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.
These 8 bit D-Type flip-flops are controlled by a clock input (CK) and an output enable input (OE).
On the positive transition of the clock, the Q outputs will be set to logic state that were setup at the D inputs.
® 74ACT574 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING s s s s s s s s s HIGH SPEED: fMAX = 250 MHz (TYP.) at VCC = 3.3V LOW POWER DISSIPATION: ICC = 8 µA (MAX.) at TA = 25 oC COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN), VIL = 0.8V (MAX) 50Ω TRANSMISSION LINE DRIVING CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 4.5V to 5.
| Part Number | Description |
|---|---|
| M74ACT574M | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING |
| M74ACT02B | QUAD 2-INPUT NOR GATE |
| M74ACT02M | QUAD 2-INPUT NOR GATE |
| M74AC574B | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING |
| M74AC574M | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING |
| M74DW66500B | 2x 64Mbit Flash Memory and 32Mbit Pseudo SRAM |
| M74HC00 | QUAD 2-INPUT NAND GATE |
| M74HC02 | QUAD 2-INPUT NOR GATE |
| M74HC03 | QUAD 2-INPUT OPEN DRAIN NAND GATE |
| M74HC04 | HEX INVERTER |