SY7102 Datasheet | Silergy

Description SY7102 is a high efficiency boost regulator targeted for general step-up applications. The device integrates a low RDS(0N) switch to minnimize the conduction loss. Low output voltage ripple and small external inductor and capacitor sizes are achieved with 1MHz switching frequency. Ordering Information - (- - )- Temperature Code Package Code Optional Spec Code Temperature Range: -40°C to 85°C Ordering Number SY7102ABC Package type SOT23-6 Note ---- Features - Wide input range:2-6V - 1MHz switching frequency - Minimum on time: 100ns typical - Minimum off time: 100ns typical - Max output voltage: 6V - Low RDS(0N): 120mΩ - Ro HS pliant and Halogen Free - pact package: SOT23-6 Applications - Solar Battery Charger - Backup Battery Typical Applications Fig. 1 Typical Schematic Diagram SY7102 Rev. 0.2 Pinout (top view) 昱灿电子 .szyucan.  SOT23-6 Top Mark:EXxyz (Device code: EX, x=year code, y=week code, z= lot number code) ` Pin Name Pin Number Pin Description 2 Ground pin LX 1 Inductor node. Connect an inductor between power input and LX pin. FB 3 Feedback pin. Connect a resistor R1 between V and FB, and a resistor R2 between FB and GND to program the output voltage: VOUT=0.6V- (R1/R2+1). EN 4 Enable control. Pull high to turn on. Do not float. 5 IC power supply input NC 6 No...