HV256 Datasheet | Supertex

Features - - 32 independent high voltage amplifiers - - 300V operating voltage - - 295V output voltage - - 2.2V/µs typical output slew rate - - Adjustable output current source limit - - Adjustable output current sink limit - - Internal closed loop gain of 72V/V - - 12MΩ feedback impedance - - Layout ideal for die applications Applications - - MEMS (microelectromechanical systems) driver - - Piezoelectric transducer driver - - Optical crosspoint switches (using MEMS technology) General Description The Supertex HV256 is a 32-channel, high voltage, amplifier array integrated circuit. It operates on a single high voltage supply, up to 300V, and two low voltage supplies, VDD and VNN. The input voltage range is from 0 to 4.096V. The internal closed loop gain is 72V/V, giving an output voltage of 295V when 4.096V is applied. Input voltages of up to 5.0V can be applied, but will cause the output to saturate. The maximum output voltage swing is 5.0V below the VPP high voltage supply. The outputs can drive capacitive loads of up to 3000p F. The maximum output source and sink current can be adjusted by using two external resistors. An external RSOURCE resistor controls the maximum sourcing current and an external RSINK resistor controls the maximum sinking current. The current limit is approximately 12.5V divided by the external resistor value. The setting is mon for all 32 outputs. A low voltage silicon junction diode is made available to help monitor the die temperature. Typical Application Circuit Micro Processor DAC DAC DAC DAC VIN0 VIN0 VIN0 VIN0 VDD VPP HV256 High Voltage Op-Amp Array HVOUT0 HVOUT1 HVOUT2 HVOUT3 RSOURCE RSINK DAC DAC VIN30 VIN31 HVOUT30 HVOUT31 AGND VNN y xx y MEMS Array Doc.# DSFP-HV256 D070813 Supertex inc. .supertex. Ordering Information Part Number Package Option HV256FG-G 100-Lead MQFP -G denotes a lead (Pb)-free / Ro HS pliant package Packing...