Datasheet4U Logo Datasheet4U.com

THCS133 - I/O Spreader

Description

The THCS133 provides a function to serialize multiple parallel signals into single-ended serial line at least or to deserialize the data stream over single-ended serial line or single differential pair into multiple parallel signals.

Features

  • - No External Clock Required. -8bit Parallel IOs to MPU. - Single-ended/Differential Mode (noise tolerant) Selectable - AC Coupling Supported with Differential Mode - Transmission Status Error Indicator Supported (Line Cut Detection and Packet Error Detection) - Digital Filter Function - Power supply : 3.0 to.

📥 Download Datasheet

Datasheet Details

Part number THCS133
Manufacturer THine Electronics
File Size 350.78 KB
Description I/O Spreader
Datasheet download datasheet THCS133 Datasheet

📁 Similar Datasheet

  • THC1420 - NPN Transistors (Allegro Microsystems)
  • THC1566 - NPN Transistors (Allegro Microsystems)
  • THC1613 - NPN Transistors (Allegro Microsystems)
  • THC1711 - NPN Transistors (Allegro Microsystems)
  • THC2017 - NPN Transistors (Allegro Microsystems)
  • THC2102 - NPN Transistors (Allegro Microsystems)
  • THC2192 - (THCxxx) NPN Transistors (Allegro Microsystems)
  • THC2195 - NPN Transistors (Allegro Microsystems)
  • THC2218 - NPN Transistors (Allegro Microsystems)
  • THC2219 - NPN Transistors (Allegro Microsystems)
Other Datasheets by THine Electronics

Full PDF Text Transcription

Click to expand full text
THCS133_Rev.1.00_E THCS133 I/OSpreader General Description The THCS133 provides a function to serialize multiple parallel signals into single-ended serial line at least or to deserialize the data stream over single-ended serial line or single differential pair into multiple parallel signals. This small number of transmission line simplifies system configuration and reduces system cost including cable width, connector size and pins and PCB layout area. The THCS133 is offered in 8bit parallel IOs as host MPU interface. It can transfer 8bit independent parallel signals to remote side by only 1-line or 1-pair cable. Transmitter or receiver function can be selected by pin. Features - No External Clock Required. -8bit Parallel IOs to MPU.
Published: |