Datasheet4U Logo Datasheet4U.com

XC6207 - LDO Voltage Regulators

Description

The XC6207 series are precise, low noise, high speed, and low dropout regulators with green operation (GO) function.

fabricated using Torex’s CMOS process.

Features

  • ximum Output Current : 300mA (Up to 380mA (TYP. )) Dropout Voltage : 40mV@ IOUT=30mA : 120mV@ IOUT=100mA Operating Voltage Range : 2.0V ~ 6.0V Output Voltage Setting Range : 1.2V ~ 5.0V (0.05V increments) Accuracy : ±2% (HS Mode: VOUT >1.5V) ＋2%, - 3% (PS Mode: VOUT >1.5V) ±30mV (HS Mode: VOUT≦1.5V) +30mV, - 45mV (HS Mode: VOUT≦1.5V) Low Power Consumption : 5.5μA (TYP. ) (PS Mode) 50μA (TYP. ) (HS Mode) Stand-by Current : Less than 0.1μA High Ripple Rejection : 70dB @ 1kHz Operating.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC6206 100mA Low Dropout CMOS Voltage Regulators JinYu
XC6206 Linear voltage regulator UMW
XC6211 300mA High Speed LDO Regulators Torex
XC6218 Low Power Supply LDO Regulators TOREX
XC6238 300mA High Speed LDO Regulator Torex

Other Datasheets by Torex Semiconductor

Part Number Description
XC6201 Positive Voltage Regulators
XC6202 High Voltage positive Voltage Regulators
XC6203 Large Current Positive Voltage Regulators
XC6204 300mA/150mA High Speed LDO Regulators
XC6205 300mA/150mA High Speed LDO Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC6207series is Not Recommended for New Designs. ETR0316_006a ■GENERAL DESCRIPTION ☆GreenOperation-Compatible The XC6207 series are precise, low noise, high speed, and low dropout regulators with green operation (GO) function. They are fabricated using Torex’s CMOS process. Performance features of the series include high ripple rejection and low dropout voltage, and the series include a reference voltage source, an error amplifier, a current limiter, and a phase compensation circuit. Output voltage is selectable in 0.05V increments within a range of 1.2V~5.0V, using laser trimming technologies. The series' output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors.
Published: |