TC9594XBG
Key Features
- DSI-TX interface MIPI® DSI compliant (Version 1.02.00- June 28, 2010) - Support DSI Video Mode data transfer - DCS Command for panel register access Supports up to 1 Gbps per data lane Supports1,2,3 or 4 data lanes Supports video data formats - RGB888/666/565
- RGB interface Supports data formats - 24-bit data bus
- RGB888/666/565 data formats Up to 166 MHz input clock Support VSYNC/HSYNC polarity option (default LOW) Support DE polarity option (default High)
- I2C/SPI Slave Interface (Option to select either I2C or SPI interface) I2C Interface (when CS=L) - Support for normal (100KHz), fast mode (400 kHz) and Special mode (1 MHz) - Configure all TC9594XBG internal registers - Writing to DCS registers will trigger DCS Command transmits over DSI SPI interface (when CS =H) - SPI interface support for up to 25 MHz operation. - Configure all TC9594XBG internal registers - Writing to DCS registers will trigger DCS Command transmits over DSI
- GPIO signals 2 GPIO signals - Two GPIO signals can be configured as SPI signals (SPI_SS and SPI_MISO) - Or one GPIO signal can be configured as Interrupt output signal, INT.
- System Clock and power management support to achieve low power states.
