TD62008F Datasheet | Toshiba

feature integral clamp diodes for switching inductive loads and protective diodes against a negative input voltage. The TD62008AP / F / AF are suitable for interfaces from minus and plus dual supply voltage system to plus single supply voltage system. Applications include relay, hammer, lamp and display (LED) drivers. Please observe the thermal condition for using. FEATURES l Output current (single output) 400 m A (Max) l High sustaining voltage output 50 V (Min) l Output clamp diodes l Protective diodes against a negative input voltage l Inputs base resistor RIN = 20 kΩ l Inputs patible with 9~15 V PMOS, CMOS. l Package type- AP : DIP- 16 pin l Package type- F, AF : SOP- 16 pin Weight DIP16- P- 300- 2.54A : 1.11 g (Typ.) SOP16- P- 225- 1.27 : 0.16 g (Typ.) PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER) Note: The input and output parasitic diodes cannot be used as clamp diodes. 1 2001-07-16 MAXIMUM RATINGS (Ta = 25°C) TD62008AP/F/AF CHARACTERISTIC SYMBOL RATING Output Sustaining Voltage AP / AF F Output Current Input Voltage Clamp Diode Reverse Voltage AP / AF F Clamp Diode Forward Current Power Dissipation AP F / AF Operating Temperature Storage Temperature VCE (SUS) IOUT VIN VR IF PD Topr Tstg - 0.5 ~ 50 - 0.5 ~ 35 - 40 ~ 40 50 35 400 1.47 0.625 (Note) - 40 ~ 85 - 55 ~ 150 Note: On Glass Epoxy PCB (30 × 30 × 1.6 mm Cu 50%) UNIT V m A / ch V V m A W °C °C REMENDED OPERATING CONDITIONS (Ta = - 40 ~...