FDC2310 Datasheet | Tyco Electronics

Open Carrier Frequency Doubler For Microwave Telemunications Features - - - - Input Frequency 1.5 to 8.0 GHz Output Frequency 3.0 to 16.0 GHz Input Drive Level +10 dBm (nominal) Microstrip Interface FDC2310 V1 Product Image Description The FDC2310 is a passive bridge diode frequency doubler, designed for use in military, mercial and test equipment applications. The design utilizes Schottky bridge quad diodes and broadband soft dielectric baluns to attain excellent performance. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number FDC2310 Package Open Carrier .. Electrical Specifications: Z0 = 50Ω Pin = +10 dBm Typical Parameter Test Conditions Units +25ºC SSB Conversion Loss (max) Fundamental Suppression (min) Third Harmonic Suppression (min) Input VSWR fin = 1.5 to 8.0 GHz fin = 1.5 to 8.0 GHz fin = 1.5 to 8.0 GHz fin = 1.5 to 8.0 GHz dB dBc dBc 11 35 40 2.0:1 14.0 19.5 20 Guaranteed -40º to +85ºC 14.5 19 18 1 M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A- makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A- assume any liability whatsoever arising out of the use or application of any product(s) or information. - North America Tel: 800.366.2266 / Fax: 978.366.2266 - Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 - Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit .ma. for additional data sheets and product information. Open Carrier Frequency Doubler For Microwave Telemunications Typical Performance Curves FDC2310 V1 2...