900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Tyco Electronics

MAAPGM0064-DIE Datasheet Preview

MAAPGM0064-DIE Datasheet

Power Amplifier

No Preview Available !

www.DataSheet4U.com
RoHS
Compliant
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Features
2 Watt Saturated Output Power Level
Variable Drain Voltage (4-10V) Operation
MSAG™ Process
High Performance Ceramic Bolt Down Package
MAAPGM0064-DIE
Rev —
Preliminary Information
Description
The MAAPGM0064-DIE is a 2-stage 2 W power amplifier with on-chip
bias networks. This product is fully matched to 50 ohms on both the
input and output. It can be used as a power amplifier stage or as a
driver stage in high power applications.
Each device is 100% RF tested to ensure performance compliance.
The part is fabricated using M/A-COM’s GaAs Multifunction Self-
Aligned Gate Process.
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of ion implanted
transistors and multiple implant capability enabling power, low-noise,
switch and digital FETs on a single chip. The use of refractory metals
and the absence of platinum in the gate metal formulation prevents
hydrogen poisoning when employed in hermetic packaging.
Primary Applications
Multiple Band Point-to-Point Radio
SatCom
ISM Band
Also Available in:
SAMPLES
Description
Ceramic Package
Sample Board (Die)
Mechanical Sample (Die)
Part Number
MAAPGM0064
MAAP-000064-SMB004
Not Available
Electrical Characteristics: TB = 40°C1, Z0 = 50 Ω, VDD = 8V, IDQ 600 mA2, Pin = 18 dBm, RG 120
Parameter
Symbol
Typical
Units
Bandwidth
f 6.5-9.5
GHz
Output Power
POUT
34.5
dBm
Power Added Efficiency
PAE
30
%
1-dB Compression Point
P1dB
32
dBm
Small Signal Gain
G
20
dB
Input VSWR
VSWR
Output VSWR
VSWR
Gate Supply Current
Drain Supply Current
Noise Figure
IGG
IDD
NF
2nd Harmonic
2f
3rd Harmonic
3f
Output Third Order Intercept
OTOI
3rd Order Intermodulation Distortion,
Single Carrier Level = 20 dBm
IM3
5th Order Intermodulation Distortion,
Single Carrier Level = 20 dBm
IM5
1. TB = MMIC Base Temperature
1 2. Adjust VGG between –2.6 and –1.2V to achieve specified Idq.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
1.8:1
3.0:1
<5
<1
9.5
-20
-45
41
-10
-25
mA
mA
dB
dBc
dBc
dBm
dBm
dBm
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.




Tyco Electronics

MAAPGM0064-DIE Datasheet Preview

MAAPGM0064-DIE Datasheet

Power Amplifier

No Preview Available !

RoHS
Compliant
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Maximum Ratings 3
Parameter
Symbol
Absolute Maximum
Input Power
Drain Supply Voltage
Gate Supply Voltage
Quiescent Drain Current (No RF, 40% Idss)
Quiescent DC Power Dissipated (No RF)
PIN
VDD
VGG
IDQ
PDISS
Junction Temperature
Storage Temperature
TJ
TSTG
3. Operation beyond these limits may result in permanent damage to the part.
23.0
+12.0
-3.0
950
7.9
170
-55 to +150
MAAPGM0064-DIE
Rev —
Preliminary Information
Units
dBm
V
V
mA
W
°C
°C
Recommended Operating Conditions4
Characteristic
Symbol
Min
Drain Supply Voltage
VDD 4.0
Gate Supply Voltage
Input Power
VGG -2.4
PIN
Thermal Resistance
ΘJC
Package Base Temperature
TB
4. Operation outside of these ranges may reduce product reliability.
5. MMIC Base Temperature = 170°C — ΘJC* VDD * IDQ
Typ Max Unit
8.0 10.0
V
-2.0 -1.3
V
18.0 21.0 dBm
12.4 °C/W
Note 5
°C
Operating Instructions
This device is static sensitive. Please handle with care. To operate the device,
follow these steps.
1. Apply VGG = -2.7 V, VDD= 0 V.
2. Ramp VDD to desired voltage, typically 8.0 V.
3. Adjust VGG to set IDQ, (approximately @ –2.0 V).
4. Set RF input.
5. Power down sequence in reverse. Turn VGG off last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.


Part Number MAAPGM0064-DIE
Description Power Amplifier
Maker Tyco Electronics
Total Page 5 Pages
PDF Download

MAAPGM0064-DIE Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MAAPGM0064-DIE Power Amplifier
Tyco Electronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy