Datasheet4U Logo Datasheet4U.com

MC34063A - DC TO DC CONVERTER CONTROLLER

Description

The UTC MC34063A is a monolithic regulator subsystem, intended for use as DC to DC converter.

This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch.

Features

  • S.
  • Operation from 3.0V to 40V.
  • Current limiting.
  • Low standby current.
  • Output switch current of 1.5A without external transistors.
  • Frequency of operation from 100Hz to 100kHz.
  • Step-up, step-down or inverting switch regulators.

📥 Download Datasheet

Datasheet preview – MC34063A

Datasheet Details

Part number MC34063A
Manufacturer UTC
File Size 494.44 KB
Description DC TO DC CONVERTER CONTROLLER
Datasheet download datasheet MC34063A Datasheet
Additional preview pages of the MC34063A datasheet.

📁 Similar Datasheet

  • MC34063A - DC-DC Converter Controller (HTC)
  • MC34063A - DC-to-DC Converter Controller (Motorola)
  • MC34063A - Inverting Regulator (ON Semiconductor)
  • MC34063A - DC/DC CONVERTER CONTROLLER (AIC)
  • MC34063A - SMPS Controller (Fairchild)
  • MC34063A - DC-DC CONVERTER CONTROL CIRCUITS (STMicroelectronics)
  • MC34063A - 1.5-A Peak Boost/Buck/Inverting Switching Regulators (Texas Instruments)
  • MC34063AB - DC-DC converter controller (STMicroelectronics)
  • MC34063AC - DC-DC converter controller (STMicroelectronics)
  • MC34063AD - DC-DC Converter Controller (HTC)
Other Datasheets by UTC
  • MC34018 - VOICE SWITCHED SPEAKER-PHONE CIRCUIT
  • MC34072 - SINGLE SUPPLY OPERATIONAL AMPLIFIER
  • MC34074 - SINGLE SUPPLY OPERATIONAL AMPLIFIER
  • MC34119 - LOW POWER AUDIO AMPLIFIER
  • MC3419 - LOW POWER AUDIO AMPLIFIER
  • MC34262 - POWER FACTOR CONTROLLERS
  • MC3063 - STEP-UP/DOWN/INVERTING SWITCHING REGULATORS
  • MC33092 - Voltage Regulator

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD MC34063A DC TO DC CONVERTER CONTROLLER LINEAR INTEGRATED CIRCUIT  DESCRIPTION The UTC MC34063A is a monolithic regulator subsystem, intended for use as DC to DC converter. This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch. It can be used for step down, step-up or inverting switching regulators as well as for series pass regulators.  FEATURES * Operation from 3.0V to 40V. * Current limiting. * Low standby current. * Output switch current of 1.5A without external transistors. * Frequency of operation from 100Hz to 100kHz. * Step-up, step-down or inverting switch regulators.
Published: |