Datasheet4U Logo Datasheet4U.com

UC3837 - LOW COST POWER-SAVING MODE PWM CONTROLLER

General Description

The UC3837 is a high performance current mode PWM controller ideally suited for low standby power.

Low VDD startup current make the power reliable on startup design and a large value resistor could be used in the startup circuit to minimize the standby power.

Key Features

  • S.
  • UTC proprietary frequency hopping technology for Improved EMI.
  • Programming BNO for higher security performance.
  • Fixed switch frequency 65kHz.
  • Power-saving mode for high light-load and standby efficiency.
  • Gate output voltage clamped at 15V.
  • Soft Start.
  • Low start-up current.
  • Dynamic peak current limiting for constant output power.
  • Cycle-by-cycle Current Limiting.
  • Built-in synchronized slope compensation.
  • Under voltage lockout (U.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UC3832 Precision Low Dropout Linear Controllers Unitrode
UC3833 Precision Low Dropout Linear Controllers Unitrode
UC3834 High Efficiency Linear Regulator Unitrode
UC3835 High Efficiency Regulator Controller Unitrode
UC3836 High Efficiency Regulator Controller Unitrode

Other Datasheets by Unisonic Technologies

Part Number Description
UC3837L LOW COST POWER-SAVING MODE PWM CONTROLLER
UC3833L ADVANCED GREEN-MODE PWM CONTROLLER
UC3838 PWM CONTROLLER
UC3816A LOW COST POWER-SAVING MODE PWM CONTROLLER
UC3842A CURRENT MODE PWM CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UC3837 Preliminary LINEAR INTEGRATED CIRCUIT LOW COST POWER-SAVING MODE PWM CONTROLLER FOR FLYBACK CONVERTERS  DESCRIPTION The UC3837 is a high performance current mode PWM controller ideally suited for low standby power. Low VDD startup current make the power reliable on startup design and a large value resistor could be used in the startup circuit to minimize the standby power. At no load condition, the IC operates in power-saving mode for lower standby power, decreasing frequency for Higher conversion efficiency at light load condition. The internal slope compensation improves system stability at high PWM duty cycle output.