Datasheet4U Logo Datasheet4U.com

MC34063 - DC to DC Converter Controller

Description

The UTC MC34063 is a monolithic regulator subsystem, intended for use as DC to DC converter.

This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch.

Features

  • Operation from 3.0V to 40V.
  • Short circuit current limiting.
  • Low standby current.
  • Output switch current of 1.5A without external transistors.
  • Frequency of operation from 100Hz to 100kHz.
  • Step-up, step-down or inverting switch regulators. DIP-8 PIN.

📥 Download Datasheet

Datasheet preview – MC34063

Datasheet Details

Part number MC34063
Manufacturer Unisonic Technologies
File Size 354.16 KB
Description DC to DC Converter Controller
Datasheet download datasheet MC34063 Datasheet
Additional preview pages of the MC34063 datasheet.

📁 Similar Datasheet

  • MC34063 - DC/DC CONVERTER CONTROL CIRCUIT (HOTCHIP)
  • MC34063 - DC-DC CONVERTER CONTROLLER (ST Microelectronics)
  • MC34063A - DC-DC Converter Controller (HTC)
  • MC34063A - DC-to-DC Converter Controller (Motorola)
  • MC34063A - Inverting Regulator (ON Semiconductor)
  • MC34063A - DC/DC CONVERTER CONTROLLER (AIC)
  • MC34063A - SMPS Controller (Fairchild)
  • MC34063A - DC-DC CONVERTER CONTROL CIRCUITS (STMicroelectronics)
  • MC34063A - DC TO DC CONVERTER CONTROLLER (UTC)
  • MC34063A - 1.5-A Peak Boost/Buck/Inverting Switching Regulators (Texas Instruments)
Other Datasheets by Unisonic Technologies
  • MC34118 - VOICE SWITCHED SPEAKER-PHONE CIRCUIT
  • MC33078 - DUAL LOW NOISE OPERATIONAL AMPLIFIERS
  • MC33178 - LOW POWER OPERATIONAL AMPLIFIERS
  • MC33272 - LOW INPUT OFFSET VOLTAGE OPERATIONAL AMPLIFIERS

Full PDF Text Transcription

Click to expand full text
( DataSheet : www.DataSheet4U.com ) UTC MC34063 LINEAR INTEGRATED CIRCUIT DC TO DC CONVERTER CONTROLLER DESCRIPTION The UTC MC34063 is a monolithic regulator subsystem, intended for use as DC to DC converter. This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch. It can be used for step down, step-up or inverting switching regulators as well as for series pass regulators. SOP-8 FEATURES *Operation from 3.0V to 40V. *Short circuit current limiting. *Low standby current. *Output switch current of 1.5A without external transistors. *Frequency of operation from 100Hz to 100kHz. *Step-up, step-down or inverting switch regulators.
Published: |