VK1024B
Features
- Operating voltage 2.4-5.2V
- Built-in 256k Hz RC oscillator（default）
- Selection of 1/2 or 1/3 bias
- Selection of 1/2 or 1/3 or 1/4 duty
- Built-in 6×4 bit display RAM
- STANDBY mode（by Cmd LCD OFF,SYS DIS）
- 3 wire serial interface
- Software configuration LCD parameters
- Data mode and mand mode instructions
- Write address auto increment
- VLCD pin for adjusting LCD operating voltage（≤VDD）
- Package: SOP16(150mil)(9.9mm x 3.9mm PP=1.27mm) .
February 2020
Rev. 1.3
1/15
.szvinka.
9.%
6×4 LCD DRIVER
1 General Description
VK1024B is a RAM Mapping 6x4 LCD Driver，It can support LCD screens with a maximum of 24 pattern(6SEGx4)，it is also supports LCD screens of 2 or 3.Only 3 lines are required to munication interface with the VK1024B , it is used to configure display parameters and transfer display data, and can also enter the standby mode through Power down mand.
February 2020
Rev. 1.3
2/15
.szvinka.
2 Pinouts and pin description
2.1 VK1024B SOP16 Pin...
