AZSR235 Datasheet | ZETTLER Electronics

FEATURES - 50 Amp switching (AZSR250) - 35 Amp switching (AZSR235) - Wide contact gap > 1.85mm (AZSR250) - Wide contact gap > 2.05mm (AZSR235) - Holding power <100 m W - Dielectric strength 5000 Vrms - Isolation spacing greater than 10 mm - Reinforced insulation, EN 60730-1 (VDE 0631, part 1), EN 60335-1 (VDE 0700, part 1) - UL, CUR file E44211 - VDE certificate 40033251 CONTACTS Arrangement SPST (1 Form A) DPST (2 Form A) Ratings Resistive load: AZSR235 Max. switched power: 1050 W or 9695 VA Max. switched current: 35 A Max. switched voltage: 150 VDC- or 440 VAC AZSR250 Max. switched power: 1500 W or 13850 VA Max. switched current: 50 A Max. switched voltage: 150 VDC- or 440 VAC Rated Load UL - Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. AZSR235 35 A at 277 VAC, resistive AZSR250 50 A at 277 VAC, resistive AZSR235 35 A at 263 VAC, test referring to AC-7a, 85°C Material Resistance AZSR250 50 A at 263 VAC, test referring to AC-7a, 85°C Silver tin oxide < 50 milliohms initially COIL Power At Pickup Voltage (typical) 270 m W (AZSR250) GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 106 5 x 104 at 35 A 250 VAC Res. (AZSR235) 5 x 104 at 50 A 250 VAC Res. (AZSR250) Operate Time (typical) 40 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 2500 Vrms between contact sets 2500 Vrms between open...