Datasheet4U Logo Datasheet4U.com

SN74LV74A-EP Datasheet Dual Positive-Edge-Triggered D-Type Flip-Flop

Manufacturer: Texas Instruments

📥 Download Datasheet

General Description

/ORDERING INFORMATION These dual positive-edge-triggered D-type flip-flops are designed for 2-V to 5.5-V VCC operation.

A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.

When PRE and CLR are inactive (high), data at the data (D) inputs meeting the setup-time requirements is transferred to the outputs on the positive-going edge of the clock pulse.

Overview

www.ti.com SN74LV74A-EP DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS SCLS696 – JANUARY.

Key Features

  • Controlled Baseline.
  • One Assembly/Test Site, One Fabrication Site.
  • Extended Temperature Performance of.
  • 55°C to 125°C.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product-Change Notification.
  • Qualification Pedigree (1).
  • 2-V to 5.5-V VCC Operation.
  • Max tpd of 13 ns at 5 V.
  • Typical VOLP (Output Ground Bounce).

More Datasheets from Texas Instruments

Part Number Description
SN74LV74A-Q1 Dual Positive-Edge-Triggered D-Type Flip-Flop
SN74LV74A Dual Positive-Edge-Triggered D-Type Flip-Flop
SN74LV74 DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN74LV00A Quadruple 2-Input Positive-NAND Gates
SN74LV02A Quadruple 2-Input Positive-NOR Gates
SN74LV04A Hex Inverters
SN74LV04A-EP Hex Inverter
SN74LV04A-Q1 Hex Inverter
SN74LV05A Hex Inverters
SN74LV06A Hex Inverter Buffers/Drivers