TMS320F28378D Datasheet | Texas Instruments

Features - Dual-core architecture - Two TMS320C28x 32-bit CPUs - 200MHz - IEEE 754 single-precision Floating-Point Unit (FPU) - Trigonometric Math Unit (TMU) - Viterbi/plex Math Unit (VCU-II) - Two programmable Control Law Accelerators (CLAs) - 200MHz - IEEE 754 single-precision floating-point instructions - Executes code independently of main CPU - On-chip memory - 512KB (256KW) or 1MB (512KW) of flash (ECC-protected) - 172KB (86KW) or 204KB (102KW) of RAM (ECC-protected or parity-protected) - Dual-zone security supporting third-party development - Unique identification number - Clock and system control - Two internal zero-pin 10MHz oscillators - On-chip crystal oscillator - Windowed watchdog timer module - Missing clock detection circuitry - 1.2V core, 3.3V I/O design - System peripherals - Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support - Dual 6-channel Direct Memory Access (DMA) controllers - Up to 169 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering - Expanded Peripheral Interrupt controller (e PIE) - Multiple Low-Power Mode (LPM) support with external wakeup - munications peripherals - USB 2.0 (MAC + PHY) - Support for 12-pin 3.3V-patible Universal Parallel Port (u PP) interface - Two Controller Area Network (CAN) modules (pin-bootable) - Three high-speed (up to 50MHz) SPI ports (pin- bootable) - Two Multichannel Buffered Serial Ports (Mc BSPs) - Four Serial munications Interfaces (SCI/ UART) (pin-bootable) - Two I2C interfaces...