Part number:
AGB3303
Manufacturer:
ANADIGICS
File Size:
192.84 KB
Description:
50 ohm high linearity low noise wideband gain block.
* DC-4500 MHz Operation Bandwidth +39 dBm Output IP3 at 850 MHz 4 dB Noise Figure at 850 MHz 21 dB Gain at 850 MHz +19 dBm P1dB SOT-89 Package Single +7.5 V to +12 V Supply Case Temperature: -40 to +85 °C APPLICATIONS Cellular Base Stations for W-CDMA, CDMA, TDMA, GSM, PCS a
AGB3303
ANADIGICS
192.84 KB
50 ohm high linearity low noise wideband gain block.
📁 Related Datasheet
AGB3300 - 50OHM HIGH LINEARITY LOW NOISE WIDEBAND GAIN BLOCK
(ANADIGICS)
AGB3300
50W High Linearity Low Noise Wideband Gain Block
FEATURES
· · · · · · · · · 250-3000 MHz Frequency Range +43 dBm Output IP3 Low Noise Figure: .
AGB3301 - 50 ohm HGIH LINEARITY LOW NOISE WIDEBAND GAIN BLOCK
(ANADIGICS)
AGB3301
50W High Linearity Low Noise Wideband Gain Block
FEATURES
· · · · · · · · · 250-3000 MHz Frequency Range +45 dBm Output IP3 Low Noise Figure: .
AGB3302 - 50 ohm HGIH LINEARITY LOW NOISE WIDEBAND GAIN BLOCK
(ANADIGICS)
50W High Linearity Low Noise Wideband Gain Block
Data Sheet - Rev 2.0
AGB3302
FEATURES
DC-5300 MHz Operation Bandwidth +36 dBm Outp.
AGB3306 - 50W High Linearity Low Noise Wideband Gain Block
(ANADIGICS)
AGB3306
50Ω High Linearity Low Noise Wideband Gain Block
PRELIMINARY DATA SHEET - Rev 1.2
FEATURES
• • • • • • • • DC-7000 MHz Operation Bandwidth +2.
AGB64LV01-QC - Easy GUI Browers Chip
(Amulet)
General Description
Amulet Easy GUI Browser Chip is a special purpose micro controller that is optimized to execute Amulet’s GUI kernel and ponent.
AG-12232A - LCD_Module
(ETC)
AG-12232A
FEATURE
1.Construction : STN/FSTN LCD, Bezel, Zebra and PCB. 2.Optional LED or EL back-light. 3.Controller : SED1520DAA or equivalent. 4.Bes.
AG-12232B - LCD_Module
(ETC)
AG-12232A
FEATURE
1.Construction : STN/FSTN LCD, Bezel, Zebra and PCB. 2.Optional LED or EL back-light. 3.Controller : SED1520DAA or equivalent. 4.Bes.
AG-12232C - LCD_Module
(ETC)
AG-12232C
FEATURE
1.Construction : STN LCD, Heat seal, Edge LED back-light and PCB. 2.Controller : SED1520D0A or equivalent. 3.Besides +5V for logic c.
