Datasheet4U Logo Datasheet4U.com

HIP4081 - 80V/2.5A Peak/ High Frequency Full Bridge FET Driver

Datasheet Summary

Description

The HIP4081 is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages.

The HIP4081 can drive every possible switch combination except those which would cause a shoot-through condition.

Features

  • Independently Drives 4 N-Channel FET in Half Bridge or Full Bridge Configurations.
  • Bootstrap Supply Max Voltage to 95VDC.
  • Drives 1000pF Load at 1MHz in Free Air at 50oC with Rise and Fall Times of Typically 10ns.
  • User-Programmable Dead Time.
  • On-Chip Charge-Pump and Bootstrap Upper Bias Supplies.
  • DIS (Disable) Overrides Input Control.
  • Input Logic Thresholds Compatible with 5V to 15V Logic Levels.
  • Very Low Power Consumption A.

📥 Download Datasheet

Datasheet preview – HIP4081

Datasheet Details

Part number HIP4081
Manufacturer Intersil Corporation
File Size 216.70 KB
Description 80V/2.5A Peak/ High Frequency Full Bridge FET Driver
Datasheet download datasheet HIP4081 Datasheet
Additional preview pages of the HIP4081 datasheet.

📁 Similar Datasheet

  • HIP4081A - High Frequency Full Bridge FET Driver (Renesas)
  • HIP4080 - High FrequencyFull Bridge FET Driver (Renesas)
  • HIP4080A - High Frequency Full Bridge FET Driver (Renesas)
  • HIP4082 - 1.25A Peak Current H-Bridge FET Driver (Renesas)
  • HIP4082IB - 1.25A Peak Current H-Bridge FET Driver (Renesas)
  • HIP4082IP - 1.25A Peak Current H-Bridge FET Driver (Renesas)
  • HIP4082IPZ - 1.25A Peak Current H-Bridge FET Driver (Renesas)
  • HIP4083 - Three Phase High Side Driver (Renesas)
  • HIP4086 - 3-Phase MOSFET Driver (Renesas)
  • HIP4086A - 3-Phase MOSFET Driver (Renesas)
Other Datasheets by Intersil Corporation
  • HIP4011 - Three Phase Brushless DC Motor Controller
  • HIP0063 - Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control
  • HIP1030 - 1A High Side Driver with Overload Protection
  • HIP1031 - Half Amp High Side Driver with Overload Protection
  • HIP1090 - Protected High Side Power Switch with Transient Suppression
  • HIP2106 - 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver
  • HIP5010 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
  • HIP5011 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge

Full PDF Text Transcription

Click to expand full text
HIP4081 November 1996 80V/2.5A Peak, High Frequency Full Bridge FET Driver Description The HIP4081 is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081 can drive every possible switch combination except those which would cause a shoot-through condition. The HIP4081 can switch at frequencies up to 1MHz andssssss is well suited to driving Voice Coil Motors, high-frequency Class D audio amplifiers, and power supplies. For example, the HIP4081 can drive medium voltage brush motors, and two HIP4081s can be used to drive high performance stepper motors, since the short minimum “on-time” can provide fine micro-stepping capability.
Published: |