Datasheet4U Logo Datasheet4U.com

HIP1030 - 1A High Side Driver with Overload Protection

Datasheet Summary

Description

The HIP1030 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load.

It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum rated current.

Features

  • Over Operating Temperature Range . . -40oC to 125oC - Max VSAT at 1A.
  • . . . 1V - Current Switching Capability.
  • . .1A - Power Supply Range.
  • . 4.5V to 25V.
  • Over-Voltage Shutdown Protected.
  • Over-Current Limiting.
  • Thermal Limiting Protection.
  • Negative Output Voltage Clamp.
  • CMOS/TTL Logic Level Control Input.
  • Load Dump.

📥 Download Datasheet

Datasheet preview – HIP1030

Datasheet Details

Part number HIP1030
Manufacturer Intersil Corporation
File Size 36.58 KB
Description 1A High Side Driver with Overload Protection
Datasheet download datasheet HIP1030 Datasheet
Additional preview pages of the HIP1030 datasheet.

📁 Similar Datasheet

  • HIP1011 - PCI Hot Plug Controller (Renesas)
  • HIP1011A - PCI Hot Plug Controller (Renesas)
  • HIP1011B - PCI Hot Plug Controller (Renesas)
  • HIP1011D - Dual Slot PCI Hot Plug Controller (Renesas)
  • HIP1011E - Dual Slot PCI Hot Plug Controller (Renesas)
  • HIP1012A - Dual Power Distribution Controller (Renesas)
  • HIP1013 - Low Cost Dual Power Distribution Controller (Renesas)
  • HIP1015 - Power Distribution Controller (Renesas)
  • HIP1016 - Power Distribution Controller (Renesas)
  • HIP1020 - Hot Plug Controller (Renesas)
Other Datasheets by Intersil Corporation
  • HIP1031 - Half Amp High Side Driver with Overload Protection
  • HIP1090 - Protected High Side Power Switch with Transient Suppression
  • HIP0063 - Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control
  • HIP2106 - 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver
  • HIP4011 - Three Phase Brushless DC Motor Controller
  • HIP4081 - 80V/2.5A Peak/ High Frequency Full Bridge FET Driver
  • HIP5010 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
  • HIP5011 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge

Full PDF Text Transcription

Click to expand full text
HIP1030 December 1997 1A High Side Driver with Overload Protection Description The HIP1030 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load. It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum rated current. The HIP1030 has low output leakage and low idle current in the OFF state. The Functional Block Diagram for the HIP1030 shows the protection control circuit functions of over-current, overvoltage and over-temperature. A small metal resistor senses overcurrent in the power supply path of the pass transistor and load.
Published: |