HSP9501 Datasheet - Intersil Corporation

HSP9501 Programmable Data Buffer

NAME VCC GND CLK PIN NUMBER 12, 34 TYPE DESCRIPTION The +5V power supply pin. A 0.1µF capacitor between the VCC and GND pin is recommended. The device ground. I Input Clock. This clock signal is used to control the data movement through the programmable buffer. It is also the signal which latches t.

HSP9501 Data Sheet January 1999 File Number 2786.4 Programmable Data Buffer The HSP9501 is a 10-Bit wide programmable data buffer designed for use in high speed digital systems. Two different modes of operation can be selected through the use of the MODSEL input. In the delay mode, a programmable data pipeline is created which can provide 2 to 1281 clock cycles of delay between the input and output data. In the data recirculate mode, the output data path is internally routed back to the input t.

HSP9501 Features

* DC to 32MHz Operating Frequency

* Programmable Buffer Length from 2 to 1281 Words

* Supports Data Words to 10-Bits

* Clock Select Logic for Positive or Negative Edge System Clocks

* Data Recirculate or Delay Modes of Operation

* Expandable Data Word

HSP9501 Datasheet (49.17 KB)