Datasheet4U Logo Datasheet4U.com

MAX19192 - Dual 8-Bit ADC

Datasheet Summary

Description

The MAX19192 is an ultra-low-power, dual, 8-bit, 10Msps analog-to-digital converter (ADC).

Features

  • two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX19192 delivers a typical signal-to-noise and distortion (SINAD) of 48.6dB at an input frequency of 1.875MHz and a sampling rate of 10Msps while consuming only 15.3mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX.

📥 Download Datasheet

Datasheet preview – MAX19192

Datasheet Details

Part number MAX19192
Manufacturer Maxim Integrated Products
File Size 1.63 MB
Description Dual 8-Bit ADC
Datasheet download datasheet MAX19192 Datasheet
Additional preview pages of the MAX19192 datasheet.

📁 Similar Datasheet

  • MAX191 - 12-Bit Sampling ADC (Maxim)
  • MAX1910 - 1.5x/2x High-Efficiency White LED Charge Pumps (Maxim)
  • MAX1912 - 1.5x/2x High-Efficiency White LED Charge Pumps (Maxim)
  • MAX1916 - Low-Dropout / Constant-Current Triple White LED Bias Supply (Maxim)
  • MAX1917 - Tracking / Sinking and Sourcing / Synchronous Buck Controller for DDR Memory and Termination Supplies (Maxim)
  • MAX190 - Low-Power / 12-Bit Sampling ADCs (Maxim)
  • MAX19005 - 200Mbps ATE Drivers/Comparators (Maxim Integrated)
  • MAX1901 - Low-Noise Power-Supply Controllers (Maxim)
  • MAX1902 - Low-Noise Power-Supply Controllers (Maxim)
  • MAX1904 - Low-Noise Power-Supply Controllers (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX19191 - 8-Bit ADC
  • MAX1907A - Quick-PWM Master Controllers
  • MAX1908 - Low-Cost Multichemistry Battery Chargers
  • MAX1909 - Multichemistry Battery Charger
  • MAX1922 - 1A Current-Limited Switch
  • MAX1946 - Single USB Switch
  • MAX1947 - Low Input/Output Voltage Step-Up DC-DC Converter
  • MAX1951A - PWM DC-DC Step-Down Regulator

Full PDF Text Transcription

Click to expand full text
19-5098; Rev 0; 1/10 www.DataSheet4U.com Ultra-Low-Power, 10Msps, Dual 8-Bit ADC General Description The MAX19192 is an ultra-low-power, dual, 8-bit, 10Msps analog-to-digital converter (ADC). The device features two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX19192 delivers a typical signal-to-noise and distortion (SINAD) of 48.6dB at an input frequency of 1.875MHz and a sampling rate of 10Msps while consuming only 15.3mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX19192 features three powerdown modes to conserve power during idle periods.
Published: |