MAX3420E Datasheet PDF - Maxim Integrated Products USB Peripheral Controller Specs

MAX3420E - USB Peripheral Controller

Datasheet Summary

Description

The MAX3420E contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0.

Features

±15kV ESD protection and programmable USB connect and disconnect. An internal serial-interface engine (SIE) handles low-level USB protocol details such as error checking and bus retries. The MAX3420E operates using a register set accessed by an SPI interface that operates up to 26MHz. Any SPI master (microprocessor, ASIC, DSP, etc. ) can add USB functionality using the simple 3- or 4-wire SPI interface. Internal level translators allow the SPI interface to run at a system voltage between 1.71V an.

Datasheet Details

Part number	MAX3420E
Manufacturer	Maxim Integrated Products
File Size	521.41 KB
Description	USB Peripheral Controller
Datasheet	MAX3420E Datasheet
Additional preview pages of the MAX3420E datasheet.

📁 Similar Datasheet

MAX3408 - 75/100/120 Switchable Termination Networks (Maxim)

MAX3430 - 80V Fault-Protected / Fail-Safe / 1/4-Unit Load / #.3V RS-485 Transceiver (Maxim)

MAX34408 - SMBus Dual/Quad Current Monitor (Maxim Integrated)

MAX34409 - SMBus Dual/Quad Current Monitor (Maxim Integrated)

MAX3440E - 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers (Maxim)

MAX34417 - SMBus Four-Channel High Dynamic Range Power Accumulator (Maxim Integrated)

MAX3441E - 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers (Maxim)

MAX3442E - 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers (Maxim)

MAX3443E - 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers (Maxim)

MAX34440 - PMBus 6-Channel Power-Supply Manager (Maxim Integrated)

Full PDF Text Transcription

Click to expand full text

MAX3420E EVALUATION KIT AVAILABLE USB Peripheral Controller with SPI Interface General Description The MAX3420E contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15kV ESD protection and programmable USB connect and disconnect. An internal serial-interface engine (SIE) handles low-level USB protocol details such as error checking and bus retries. The MAX3420E operates using a register set accessed by an SPI interface that operates up to 26MHz. Any SPI master (microprocessor, ASIC, DSP, etc.) can add USB functionality using the simple 3- or 4-wire SPI interface. Internal level translators allow the SPI interface to run at a system voltage between 1.71V and 3.

Published: Sep 6, 2007 |