Datasheet4U Logo Datasheet4U.com

MAX5064 - Half-Bridge MOSFET Drivers

This page provides the datasheet information for the MAX5064, a member of the MAX5062 Half-Bridge MOSFET Drivers family.

Description

The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive highand low-side MOSFETs in high-voltage applications.

These drivers are independently controlled and their 35ns typical propagation delay, from input to output, are matched to within 3ns (typ).

📥 Download Datasheet

Datasheet preview – MAX5064

📁 Similar Datasheet

  • MAX5069 - High-Frequency / Current-Mode PWM Controller (Maxim Integrated)
  • MAX500 - CMOS / Quad / Serial-Interface 8-Bit DAC (Maxim)
  • MAX5003 - High-Voltage PWM Power-Supply Controller (Maxim)
  • MAX501 - Voltage-Output / 12-Bit Multiplying DACs (Maxim)
  • MAX5012 - 12-Bit / 100Msps ECL DAC (Maxim)
  • MAX5013 - 12-Bit / 100Msps TTL DAC (Maxim)
  • MAX5014 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5015 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5018 - 8-Bit / High-Speed DAC (Maxim)
  • MAX5019 - Current-Mode PWM Controllers with Integrated Startup Circuit (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX5060 - Average-Current-Mode DC-DC Controllers
  • MAX5061 - Average-Current-Mode DC-DC Controllers
  • MAX5062 - Half-Bridge MOSFET Drivers
  • MAX5063 - Half-Bridge MOSFET Drivers
  • MAX5065 - (MAX5065 / MAX5067) Average-Current-Mode Controllers
  • MAX5066 - Synchronous Buck Controller
  • MAX5067 - (MAX5065 / MAX5067) Average-Current-Mode Controllers
  • MAX5068 - Current-Mode PWM Controller

Full PDF Text Transcription

Click to expand full text
19-3502; Rev 5; 5/07 MAX5062/MAX5063/MAX5064 125V/2A, High-Speed, Half-Bridge MOSFET Drivers General Description The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive highand low-side MOSFETs in high-voltage applications. These drivers are independently controlled and their 35ns typical propagation delay, from input to output, are matched to within 3ns (typ). The high-voltage operation with very low and matched propagation delay between drivers, and high source/sink current capabilities in a thermally enhanced package make these devices suitable for the high-power, high-frequency telecom power converters. The 125V maximum input voltage range provides plenty of margin over the 100V input transient requirement of telecom standards.
Published: |