MAX3349E - USB 2.0 Full Speed TRansceiver

Maxim Integrated Products

Datasheet Details

The MAX3349E ±15kV ESD-protected, USB transceiver provides a full-speed USB interface to a lower voltage microprocessor or ASIC.

a separate UART voltage supply input to support legacy devices using +2.75V signaling. The MAX3349E supports a maximum UART baud rate of 921kbaud. Upon connection to a USB host, the MAX3349E enters USB mode and provides a full-speed USB 2.0 compliant interface through VP, VM, RCV, and OE. The MAX3349E features internal series termination resistors on D+ and D-, and an internal 1.5kΩ pullup resistor to D+ to allow the device to logically connect and disconnect from the USB while plugged in. A sus.

📁 MAX3349E Similar Datasheet

MAX334 - High Speed Quad SPST Analog Switch (Maxim)
MAX331 - 460kbps / 1A Supply Current / RS-232-Compatible Transceivers (Maxim)
MAX3311 - 460kbps / 1A Supply Current / RS-232-Compatible Transceivers (Maxim)
MAX3311E - RS-232-Compatible Transceivers (Maxim)
MAX3313 - 460kbps / 1A Supply Current / RS-232-Compatible Transceivers (Maxim)
MAX3313E - RS-232-Compatible Transceivers (Maxim Integrated)
MAX3314 - 460kbps / 1A / RS-232-Compatible Transceiver (Maxim)
MAX3314E - 15kV ESD-Protected / 460kbps / 1A / RS-232-Compatible Transceiver (Maxim)

Other Datasheets by Maxim Integrated Products

MAX3349EA - USB 2.0 Full Speed TRansceiver
MAX3341E - +-15kV ESD-Protected USB Level Translator in UCSP with USB Detect
MAX3344E - +-5kV ESD-Protected USB Transceivers
MAX3345E - +-5kV ESD-Protected USB Transceivers
MAX3346E - +-15kV ESD-Protected USB Transceiver
MAX3301E - (MAX3301E / MAX3302E) USB On-the-Go Transceiver and Charge Pump

Published: Feb 26, 2007 |