* rom preheating to soldering, the maximum temperature gradient shall be 5°C or less.
* After soldering has been completed, the device should be allowed to cool naturally for at least three minutes. Gradual cooling should be used as the use of forced cooling will increase the temperature gradi
MMBT3904LT1 Datasheet (230.80 KB)
MMBT3904LT1
Motorola
230.80 KB
General purpose transistor.
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MMBT3904LT1/D
General Purpose Transistor
NPN Silicon
COLLECTOR 3 1 BASE
MMBT3904LT1
M.
📁 Related Datasheet
MMBT3904LT1 General Purpose Transistor (ON)
MMBT3904LT1 NPN Transistor (Tuofeng Semiconductor)
MMBT3904LT1 NPN Transistor (Silicon Standard)
MMBT3904LT1G NPN Transistor (ON Semiconductor)
MMBT3904LT3G NPN Transistor (ON Semiconductor)
MMBT3904L NPN Transistor (ON)
MMBT3904LP 40V NPN SMALL SIGNAL TRANSISTOR (Diodes)
MMBT3904 40V NPN SMALL SIGNAL TRANSISTOR (Diodes)
MMBT3904 NPN Silicon Switching Transistors (Infineon Technologies AG)
MMBT3904 NPN switching transistor (NXP)
