CAT25160 Datasheet PDF - ON Semiconductor 16Kb SPI Serial CMOS EEPROM Specs

CAT25160 - 16Kb SPI Serial CMOS EEPROM

This page provides the datasheet information for the CAT25160, a member of the CAT25080 16Kb SPI Serial CMOS EEPROM family.

Datasheet Summary

Description

The CAT25080/25160 are a EEPROM Serial 8/16

internally organized as 1024x8/2048x8 bits.

byte page write buffer and support the Serial Peripheral Interface (SPI) protocol.

The device is enabled through a Chip Select (CS) input.

Features

20 MHz SPI (5 V) Compatible.
1.8 V to 5.5 V Supply Voltage Range.
SPI Modes (0,0) & (1,1).
32.
byte Page Write Buffer.
Self.
timed Write Cycle.
Hardware and Software Protection.
Block Write Protection.
Protect 1/4, 1/2 or Entire EEPROM Array.
Low Power CMOS Technology.
1,000,000 Program/Erase Cycles.
100 Year Data Retention.
Industrial and Extended Temperature Range.

Datasheet Details

Part number	CAT25160
Manufacturer	ON Semiconductor
File Size	362.30 KB
Description	16Kb SPI Serial CMOS EEPROM
Datasheet	CAT25160 Datasheet
Additional preview pages of the CAT25160 datasheet.

📁 Similar Datasheet

CAT25160 - (CAT25080 / CAT25160) 8-Kb and 16-Kb SPI Serial CMOS EEPROM (Catalyst Semiconductor)

CAT25 - Thick Film Chip Resistor Arrays (Bourns Electronic Solutions)

CAT25 - Thick Film Chip Resistor Arrays (Bourns Electronic)

CAT25010 - 1K/2K/4K SPI Serial CMOS EEPROM (Catalyst Semiconductor)

CAT25020 - 1K/2K/4K SPI Serial CMOS EEPROM (Catalyst Semiconductor)

CAT25040 - 1K/2K/4K SPI Serial CMOS EEPROM (Catalyst Semiconductor)

CAT25080 - (CAT25080 / CAT25160) 8-Kb and 16-Kb SPI Serial CMOS EEPROM (Catalyst Semiconductor)

CAT25320 - 32-Kb SPI Serial CMOS EEPROM (Catalyst Semiconductor)

CAT25C01 - 1K/2K/4K/8K/16K SPI Serial CMOS E2PROM (Catalyst Semiconductor)

CAT25C02 - 1K/2K/4K/8K/16K SPI Serial CMOS E2PROM (Catalyst Semiconductor)

Full PDF Text Transcription

Click to expand full text

EEPROM Serial 8/16-Kb SPI CAT25080, CAT25160 Description The CAT25080/25160 are a EEPROM Serial 8/16−Kb SPI devices internally organized as 1024x8/2048x8 bits. They feature a 32−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25080/25160 device. These devices feature software and hardware write protection, including partial as well as full array protection. Features • 20 MHz SPI (5 V) Compatible • 1.8 V to 5.

Published: Jul 31, 2015 |