NCP1596 Datasheet - ON Semiconductor

NCP1596 1.5 MHz Current Mode PWM Buck Down Converter

Pin # Symbol Pin Description NCP1596 1 FB Feedback pin. Part is internally compensated. Only necessary to place a voltage divider or connect the output directly to this pin. 2 GND Ground 3 LX Pin connected internally to power switch. Connect externally to inductor. 4 VCCP Power connecti.

NCP1596, NCP1596A Product Preview 1.5 A, 1.5 MHz Current Mode PWM Buck Down Converter The NCP1596/NCP1596A is a current mode PWM buck converter with integrated power switch. It can provide up to 1.5 A output current with high conversion efficiency. High frequency PWM control scheme can provide a low output ripple noise. Thus, it allows the usage of small size passive components to reduce the board space. In a low load condition, the controller will automatically change to PFM mode which provide.

NCP1596 Features

* High Efficiency up to 90%, 1 A @ 3.3 V, 75% @ 1.2 V

* Fully Internal Compensation

* Low Output Voltage Ripple, 20 mV Typical

* ±1.5% Reference Voltage

* High PWM Switching Frequency, 1.5 MHz

* Automatic PWM / PFM Switchover at Light Load

* Bu

NCP1596 Datasheet (277.01 KB)