NCP1597A Datasheet - ON Semiconductor

NCP1597A 2.0A Synchronous Buck Regulator

Pin No Symbol 1 FB 2 GND 3 LX 4 VCCP 5 VCC 6 EN EP PAD Figure 1. Block Diagram Description Feedback input pin of the Error Amplifier. Connect a resistor divider from the converter’s output voltage to this pin to set the converter’s output voltage. Ground pin. Connect to thermal pad. The drains.

NCP1597A Buck Regulator - Synchronous 1 MHz, 2.0 A The NCP1597A family are fixed 1 MHz, high output current, synchronous PWM converters that integrate a low resistance, high side P channel MOSFET and a low side N channel MOSFET. The NCP1597A utilizes current mode control to provide fast transient response and excellent loop stability. It regulates input voltages from 4.0 V to 5.5 V down to an output voltage as low as 0.8 V and is able to s.

NCP1597A Features

* include cycle

* by

* cycle current limiting, short

* circuit protection, power saving mode and thermal shutdown. Features

* Input Voltage Range: from 4.0 V to 5.5 V

* Internal 140 mW High

* Side Switching P

* Channel MOSFET and 90 mW Low

* Side N

NCP1597A Datasheet (556.72 KB)