NCP5424A Datasheet - ON Semiconductor

NCP5424A Dual Synchronous Buck Controller

PIN # SYMBOL FUNCTION 1 GATE(H)1 High Side Switch FET driver pin for channel 1. 2 GATE(L)1 Low Side Synchronous FET driver pin for channel 1. 3 GND Ground pin for all circuitry contained in the IC. This pin is internally bonded to the substrate of the IC. 4 BST Power input for GATE(H)1 .

NCP5424A Dual Synchronous Buck Controller with Input Current Sharing The NCP5424A is a flexible dual N channel synchronous buck controller utilizing V2™ control for fast transient response and excellent line and load regulation. This highly versatile controller can be configured as a single two phase output converter that draws programmable amounts of current from two different input voltages or all current from one supply. The NCP5424A can also be configured as two independent out <.

NCP5424A Features

* Cycle

* to

* Cycle Current Limit

* Programmable Soft Start

* 100% Duty Cycle for Enhanced Transient Response

* 150 kHz to 600 kHz Programmable Frequency Operation

* Switching Frequency Set by Single Resistor

* Out

* Of

* Phase

NCP5424A Datasheet (129.87 KB)