NCV7703C Datasheet - ON Semiconductor

NCV7703C Triple Half-Bridge Driver

Pin # Symbol Description 1 GND * Ground. Connect all grounds together. 2 OUT3 Half Bridge Output 3. 3 VS Power Supply input for the output drivers and internal supply voltage. 4 CSB Chip Select Bar. Active low serial port operation. 5 SI Serial Input 6 SCLK Serial Clock 7 G.

Triple Half-Bridge Driver with SPI Control NCV7703C The NCV7703C is a fully protected Triple Half Bridge Driver designed specifically for automotive and industrial motion control applications. The three half bridge drivers have independent control. This allows for high side, low side, and H Bridge control. H Bridge control provides forward, reverse, brake, and high impedance states (with EN = 0). The drivers are controlled via a standard Serial Peripheral Interf.

NCV7703C Features

* Ultra Low Quiescent Current in Sleep Mode, 1 mA for VS and VCC

* 3 High

* Side and 3 Low

* Side Drivers Connected as Half

* Bridges

* Internal Free

* Wheeling Diodes

* Configurable as H

* Bridge Drivers

* 500 mA (typ), 1.1 A (ma

NCV7703C-ONSemiconductor.pdf