Datasheet4U Logo Datasheet4U.com

A540 - SILICON RECTIFIER

Datasheet Summary

Description

The A5368CA is a low-current CMOS circuit providing all of the required

Features

  • for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke, all units will sound an alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector. This device is designed to comply with Underwriters Laboratories Specification UL217. The internal oscillator and timing circuitry keeps standby power to a minimum by powering down the device for 1.66 seconds an.

📥 Download Datasheet

Datasheet preview – A540

Datasheet Details

Part number A540
Manufacturer Powerex Power Semiconductors
File Size 89.64 KB
Description SILICON RECTIFIER
Datasheet download datasheet A540 Datasheet
Additional preview pages of the A540 datasheet.

📁 Similar Datasheet

  • A54 - 5 TO 500 MHz CASCADABLE AMPLIFIER (Tyco Electronics)
  • A544 - Miniature Alkaline (Energizer)
  • A54SX08 - SX Family FPGAs (Actel)
  • A54SX16 - SX Family FPGAs (Actel)
  • A54SX16P - SX Family FPGAs (Actel)
  • A54SX32 - SX Family FPGAs (Actel)
  • A54SXxx - FPGAs (Actel)
  • A54SXxxA - SX-A Family FPGAs (Actel)
Other Datasheets by Powerex Power Semiconductors

Full PDF Text Transcription

Click to expand full text
5368 SMOKE DETECTOR WITH INTERCONNECT AND TIMER The A5368CA is a low-current, CMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke, all units will sound an alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector. This device is designed to comply with Underwriters Laboratories Specification UL217. The internal oscillator and timing circuitry keeps standby power to a minimum by powering down the device for 1.66 seconds and sensing smoke for only 10 ms. Every 24 on/off cycles, a check is made for low battery condition.
Published: |