M29W004BT - 4 Mbit 512Kb x8 / Boot Block Low Voltage Single Supply Flash Memory
The M29W004B is a 4 Mbit (512Kb x8) non-volatile memory that can be read, erased and reprogrammed.
These operations can be performed using a single low voltage (2.7 to 3.6V) supply.
On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.
The M29W004B
M29W004BT M29W004BB 4 Mbit (512Kb x8, Boot Block) Low Voltage Single Supply Flash Memory s SINGLE 2.7 to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 55ns PROGRAMMING TIME 10µs by Byte typical 11 MEMORY BLOCKS 1 Boot Block (Top or Bottom Location) 2 Parameter and 8 Main Blocks s s s s PROGRAM/ERASE CONTROLLER Embedded Byte Program algorithm Embedded Multi-Block/Chip Erase algorithm Status Register Polling
M29W004BT Features
* iming requirements. Output Disable. The Data Inputs/Outputs are in the high impedance state when Output Enable is