S93A56A Datasheet - Seiko Instruments

S93A56A (S93Ax6A) CMOS SERIAL E2PROM

1 CS Chip select input CS VCC 2 SK Serial clock input 2 7 SK NC 3 DI Serial data input 3 6 DI TEST 4 DO Serial data output 4 5 5 GND Ground DO GND *1 6 TEST Test 7 NC No connection 8 VCC Power supply Figure 1 *1. Connect to GND or VCC. Even if this pin is not connected, performance is not af.

www.DataSheet4U.com Rev.2.1_00 CMOS SERIAL E2PROM S-93A46A/56A/66A The S-93A46A/56A/66A is a high-temperature operation, high speed, low current consumption, 1 Kbit, 2 K-bit and 4 K-bit serial E2PROM with a wide operating voltage range. It is organized as 64-word × 16-bit, 128-word × 16-bit and 256-word × 16-bit in each. It is capable of sequential read, at which time addresses are automatically incremented in 16-bit blocks. The instruction code is compatible with the NM93CS46/56/66.

S93A56A Features

* Low current consumption

* Wide operating voltage range Standby: 3.0 µA Max. (VCC = 5.5 V) Operating: 1.0 mA Max. (VCC = 5.5 V) 0.6 mA Max. (VCC = 2.7 V) Read: 2.7 to 5.5 V Write: 2.7 to 5.5 V

* Sequential read capable

* Write disable function when power supply volt

S93A56A Datasheet (390.44 KB)