TA1319AP Datasheet - Toshiba

TA1319AP Switched Mode Power Supply (SMPS) Controller IC

* Low Frequency/Steady State Continuous Switching Method 3V FB IN + Converter for switching frequency Drive-Pulse Freq =25 kHz 4.5kƒ¶ 13.5kƒ¶ STB SET 100ƒ¶ Output R Figure 1. Block Diagram of Control Mode Switching Location The TA1319 IC is equipped with a low frequency continuous mode to low.

TA1319AP/AF Toshiba Bipolar Linear IC - Silicon Monolithic TA1319AP/AF TA1319AP Switched Mode Power Supply (SMPS) Controller IC The TA1319AP/AF is a switched mode power supply (SMPS) controller IC that is capable of switching from high frequency PWM (pulse width modulation) mode to low frequency mode to reduce power consumption during standby. This IC can build power supplies that contribute to power consumption savings for electronic appliances that run at 50 W or lower during operation such .

TA1319AP Features

* Equipped with low frequency PWM mode and high frequency PWM mode for effectively reducing power consumption during standby conditions. The switch to standby mode is made when the FB voltage input to pin 4 (FB IN) exceeds the set voltage. The set voltage is determined by pin 3 (STB). OPP (Over Power

TA1319AP Datasheet (687.21 KB)