UCC2895 - Phase-Shift PWM Controller

Texas Instruments

UCC2895 Datasheet Preview — Preview of UCC2895 PDF

Datasheet Details

Part number	UCC2895
Manufacturer	Texas Instruments ↗
File Size	2.77 MB
Description	Phase-Shift PWM Controller
Datasheet	UCC2895-etcTI.pdf

UCC2895 Product details

Description

The UCC3895 is a phase-shift PWM controller that implements control of a full-bridge power stage by phase shifting the switching of one half-bridge with respect to the other.

Features

1 Programmable-output turnon delay.
Adaptive delay set.
Bidirectional oscillator synchronization.
Voltage-mode, peak current-mode, or average current-mode control.
Programmable soft start, soft stop, and chip disable via a single pin.
0% to 100% duty-cycle control.
7-MHz error amplifier.
Operation to 1 MHz.
Typical 5-mA operating current at 500 kHz.
Very low 150-μA current during UVLO 2.

📁 UCC2895 Similar Datasheet

UCC2807-1 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)
UCC2807-2 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)
UCC2807-3 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)
UCC2808-1 - Low Power Current Mode Push-Pull PWM (Unitrode)
UCC2808-2 - Low Power Current Mode Push-Pull PWM (Unitrode)
UCC2809-1 - Economy Primary Side Controller (Unitrode)
UCC2809-2 - Economy Primary Side Controller (Unitrode)
UCC281-3 - Low Dropout 1 Ampere Linear Regulator (Unitrode)

Other Datasheets by Texas Instruments

UCC2895-EP - Phase-Shift PWM Controller
UCC2895-Q1 - Phase-Shift PWM Controller
UCC28950 - Green Phase-Shifted Full-Bridge Controller
UCC28950-Q1 - Green Phase-Shifted Full-Bridge Controller
UCC2891 - Active Clamp PWM Controller
UCC28910 - High-Voltage Flyback Switcher

Published: Apr 25, 2020 |