TPT4032 Datasheet | 3PEAK

Features - Meets the TIA/EIA- 422-B requirements - High speed, up to 50Mbps data rate, and t PLH = t PHL = 17 ns typical - Low pulse distortion, tsk(p) = 0.7 ns typical - -7V ~ +12V mon-Mode Range With ±200m V sensitivity - Input Hysteresis: 40 m V typical - Wide power supply voltage 3.0V to 5.5V - Bus-Pin Protection: - ±18 k V HBM protection - ±10 k V IEC-Contact ESD - ±15 k V IEC-Air Charge ESD - Pb-Free - Package: SOP16, TSSOP16 Applications - Field Transmitters: Temperature Sensors and Pressure Sensors - Motor Controller and Position Encoder Systems - Factory Automation - Industrial Control Networks - Description 3PEAK’s TPT4032 is an enhanced RS422 device which meets standard TIA/EIA-422-B with strong ESD protection capability. The BUS-pin can pass ±18k V HBM-ESD, and ±15 k V IEC-Air Charge ESD protection. It works in wide power supply range: from 3.0V to 5.5V VCC, which design quad receiver for balanced munication. It also features the wide input mon-mode voltage and higher data rate, the TPT4032 can accept -7V ~ +12V mon-mode differential input with 100 Ω Load and 50Mbps data rate in 5.0V power supply, required by high speed field-bus applications. The TPT4032’s enable functions can control all four receivers and provide an active-high (G) or active-low (/G) enable input, and they provide the highimpedance state in the power-off condition, which only consume <1u A very low current. The TPT4032 is available in an SOP16 and TSSOP16 package, and is characterized from - 40°C to 125°C. Typical Application Circuit .3peak. 1 / 18 Rev. A.2 High Speed Quad Differential RS422 Receiver Table of Contents Features 1 Applications 1 Description...