TPT4089 Datasheet | 3PEAK

Features 3.3V~5.0V Full Duplex RS-485 Transceivers with polarity control Description - Exceeds Requirements of EIA-485 Standard - Hot Plug Circuitry - Tx and Rx Outputs Remain Three- State During Power-up/Power-down - Supply voltage: 3.0V ~ 5.5V - Data Rate: 32Mbps or 500Kbps - Up to 256 Nodes on a Bus (1/8 unit load) - Full Fail-safe Receiver (Open, Short, Terminated) - H/F control to support Half and Full Duplex RS485 - Polarity Control to Correct for Bus Reversal through RXP/TXP Pins - Bus-Pin Protection: ±12 k V IEC61000-4-2 Contact Discharge ±15 k V IEC61000-4-2 Air Discharge ±2 k V IEC61000-4-4 Fast Transient Burst - - 40°C to 125°C Operation Temperature Range The TPT4089 is IEC61000 ESD protected, 5V transceivers that meet the RS-485 and RS-422 standards for Half and Full Duplex munication. The TPT4089 features a fail-safe receiver, which support the output of the receiver to be logic high when the differential input (bus pin A/B) of the receiver is open, short or idle when RXP=0V. Transmitters in this family deliver exceptional differential output voltages into the RS-485 required 54Ω load. The 10Mbps devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters. Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus. The TPT48x is characterized from - 40°C to 125°C. Applications - Home Appliance - Motor Drives - Industrial Control - munication Infrastructure Simplified Schematic Device Table Part TPT4089 Duplex Half or Full Enable Yes Data Rate 32Mbps or 500Kbps Package SOP14 .3peak. 1 / 17 Rev. A0 3.3V~5.0V Full Duplex RS-485 Transceivers with polarity control Table of Contents Features...