AT91CAP9SC250A
AT91CAP9SC250A is Customizable Microcontroller Processor manufactured by Atmel.
..
Features
- Incorporates the ARM926EJ-S™ ARM® Thumb® Processor
- DSP Instruction Extensions, ARM Jazelle® Technology for Java® Acceleration
- 16 Kbyte Data Cache, 16 Kbyte Instruction Cache, Write Buffer
- 220 MIPS at 200 MHz
- Memory Management Unit
- Embedded ICE™ In-circuit Emulation, Debug munication Channel Support Additional Embedded Memories
- One 32 Kbyte Internal ROM, Single-cycle Access at Maximum Matrix Speed
- One 32 Kbyte Internal SRAM, Single-cycle Access at Maximum Matrix Speed External Bus Interface (EBI)
- EBI Supports Mobile DDR, SDRAM, Low Power SDRAM, Static Memory, Synchronous Cellular RAM, ECC-enabled NAND Flash and pact Flash® Metal Programmable (MP) Block
- 500,000 Gates/250,000 Gates Metal Programmable Logic (through 5 Metal Layers) for AT91CAP9SC500A/AT91CAP9SC250A Respectively
- Ten 512 x 36-bit Dual Port RAMs
- Eight 512 x 72-bit Single Port RAMs
- High Connectivity for Up to Three AHB Masters and Four AHB Slaves
- Up to Seven AIC Interrupt Inputs
- Up to Four DMA Hardware Handshake Interfaces
- Delay Lines for Double Data Rate Interface
- UTMI+ Full Connection
- Up to 77 Dedicated I/Os LCD Controller
- Supports Passive or Active Displays
- Up to 24 Bits per Pixel in TFT Mode, Up to 16 Bits per Pixel in STN Color Mode
- Up to 16M Colors in TFT Mode, Resolution Up to 2048x2048, Supports Wider Screen Buffers Image Sensor Interface
- ITU-R BT. 601/656 External Interface, Programmable Frame Capture Rate
- 12-bit Data Interface for Support of High Sensibility Sensors
- SAV and EAV Synchronization, Preview Path with Scaler, YCb Cr Format USB 2.0 Full Speed (12 Mbits per second) OHCI Host Double Port
- Dual On-chip Transceivers
- Integrated FIFOs and Dedicated DMA Channels USB 2.0 High Speed (480 Mbits per second) Device Port
- On-chip Transceiver, 4 Kbyte Configurable Integrated DPRAM
- Integrated FIFOs and Dedicated DMA...
