HCPL-0300 Datasheet | AVAGO TECHNOLOGIES

HCPL-2300, HCPL-0300 8 MBd Low Input Current Optocoupler Data Sheet Lead (Pb) Free Ro HS 6 fully pliant Ro HS 6 fully pliant options available; -xxx E denotes a lead-free product Description The HCPL-2300/HCPL-0300 optocoupler bines an 820 nm Al Ga As photon emitting diode with an integrated high gain photon detector. This bina-tion of Avago designed and manufactured semiconductor devices brings new high performance capabilities to designers of isolated logic and data munication circuits. The new low current, high speed Al Ga As emitter manufactured with a unique diffused junction, has the virtue of fast rise and fall times at low drive currents. Figure 6 illustrates the propaga­tion delay vs. input current characteristic. These unique characteristics enable this device to be used in an RS-232-C inter­face with ground loop isolation and improved mon mode rejection. As a line receiver, the HCPL-2300/HCPL-0300 will operate over longer line lengths for a given data rate because of lower IF and VF specifications. Features - Guaranteed low thresholds: IF = 0.5 m A, VF ≤ 1.5 V - High speed: guaranteed 5 MBd over temperature - Versatile: patible with TTL, LSTTL and CMOS - Efficient 820 nm Al Ga As LED - Internal shield for guaranteed mon mode rejection - Schottky clamped, open collector output with optional integrated pull-up resistor - Static and dynamic performance guaranteed from -40°C to 85°C - Safety approval - UL recognized -3750 V rms for 1 minute - CSA approved - IEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (Option 060) Functional Diagram NC 1 8 VCC RL Applications - Ground loop elimination - puter-peripheral interfaces - Level shifting - Microprocessor system interfaces - Digital isolation for A/D, D/A conversion - RS-232-C interface - High speed, long distance isolated line...