HCPL-0300 Datasheet | Agilent Technologies

8 MBd Low Input Current Optocoupler Technical Data HCPL-2300/HCPL-0300 Features - Guaranteed Low Thresholds: IF = 0.5 m A, VF ≤ 1.5 V - High Speed: Guaranteed 5 MBd over Temperature - Versatile: patible with TTL, LSTTL and CMOS - Efficient 820 nm Al Ga As LED - Internal Shield for Guaranteed mon Mode Rejection - Schottky Clamped, Open Collector Output with Optional Integrated Pull-Up Resistor - Static and Dynamic Performance Guaranteed from -40°C to 85°C - Safety Approval UL Recognized -3750 V rms for 1 minute CSA Approved IEC/EN/DIN EN 60747-5-2 Approved with VIORM = 630 V peak (Option 060) - Microprocessor System Interfaces - Digital Isolation for A/D, D/A Conversion - RS-232-C Interface - High Speed, Long Distance Isolated Line Receiver bination of Agilent designed and manufactured semiconductor devices brings new high performance capabilities to designers of isolated logic and data munication circuits. The new low current, high speed Al Ga As emitter manufactured with a unique diffused junction, has the virtue of fast rise and fall times at low drive currents. Figure 6 illustrates the propagation delay vs. input current characteristic. These unique Description The HCPL-2300/HCPL-0300 optocoupler bines an 820 nm Al Ga As photon emitting diode with an integrated high gain photon detector. This Functional Diagram Schematic ICC 1000 Ω 8 7 VCC RL VO VCC IF + VF 2 ANODE CATHODE VOUT - 3 SHIELD A 0.1 µF CAPACITOR MUST BE CONNECTED BETWEEN PINS 8 AND 5 (SEE NOTE 1). 5 GND Applications - Ground Loop Elimination - puter-Peripheral Interfaces - Level Shifting A 0.1 p F bypass capacitor must be connected between pins 5 and...