AZ734 Datasheet | ZETTLER Electronics

.. DPST MINIATURE POWER RELAY Features - - - - - - Dielectric strength 4000 Vrms Low cost Epoxy sealed version available 5 Amp switching - double pole contacts UL Class B insulation system UL, CUR file E43203 CONTACTS Arrangement Ratings DPST (2 Form A) Resistive load: Max. switched power: 150 W or 1200 VA Max. switched current: 5 A Max. switched voltage: 150- VDC or 380 VAC - Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. 15 ms at nominal coil voltage 10 ms at nominal coil voltage (with no coil suppression) Rated Load UL, CUR 5 A at 250 VAC general use, 100k cycles 5 A at 30 VDC resistive, 100k cycles TV-3 at 125 VAC Silver cadmium oxide, silver tin oxide < 50 milliohms initially (24 V, 1 A voltage drop method) Dielectric Strength 4000 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms between open contacts 1000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10- 55 Hz 20 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 13 grams Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 300 m W Enclosure Terminals Max. Solder Temp. Max. Solder Time 1.5 W at 20°C (68°F) ambient 45°C (81°F) at nominal coil voltage Max. Immersion Time Max. 130°C (266°F) Weight Max. Solvent Temp. NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 7/12/01W .. RELAY ORDERING DATA COIL SPECIFICATIONS Nomina...