Datasheet4U Logo Datasheet4U.com

AP22816 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

General Description

The DIODES™ AP22816/17/18 is a single-channel, current-limited, integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications.

The family of devices complies with USB standards and is available with both polarities of enable input.

Key Features

  • Input Voltage Range: 2.7V to 5.5V.
  • 75mΩ On-resistance.
  • Built-in Soft-start with 0.6ms Typical Rise Time.
  • Fault Report (FLG) with Blanking Time (6ms Typ. ).
  • ESD Protection: 2kV HBM, 500V CDM.
  • Logic Level Enable Pin: Available with Active-high or Active-low Versions.
  • Protections:.
  • Overcurrent Protection with Auto Recovery.
  • Short-Circuit Protection with Auto Recovery.
  • Overtemperature Protection with Auto Recovery.
  • Output Reverse Current / Volta.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP2201 RF ULDO REGULATOR BCD Semiconductor
AP2201 PFM Control Step-Up Switching Regulator Chipown
AP2202 RF ULDO REGULATOR BCD Semiconductor
AP2203 RF ULDO REGULATOR BCD Semiconductor
AP2204 WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR BCD Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP2281 Single Slew Rate Controlled Load Switch
AP22811 SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP22814 SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP22815 SINGLE CHANNEL POWER DISTRIBUTION SWITCH
AP22817 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP22816/17/18 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH Description The DIODES™ AP22816/17/18 is a single-channel, current-limited, integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of enable input. The device has fast short-circuit response time for improved overall system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor.