Datasheet4U Logo Datasheet4U.com

AP22815 - SINGLE CHANNEL POWER DISTRIBUTION SWITCH

Datasheet Summary

Description

The AP22815/615 is a 3A single-channel current-limited high-side power switch with output OVP optimized for USB and other hot-swap applications, which must have overvoltage protection from output to protection the system.

Features

  • Input Voltage Range: 3.0V to 5.5V.
  • 40mΩ On-Resistance.
  • Built-In Soft-Start with 2.1ms Typical Rise Time.
  • Fault Report (FLG) with Blanking Time (7ms Typ).
  • Accurate Adjustable Current Limit, 0.4A to 4.0A (AP22615 Only).
  • ESD Protection: 2kV HBM, 200V MM.
  • Active Low or Active High Enable.
  • Protection.
  • Output Overvoltage with Auto Recovery.
  • Overcurrent with Auto Recovery.
  • Short-Circuit with Auto Recovery.
  • Overtemperature with Auto Recovery.

📥 Download Datasheet

Datasheet preview – AP22815

Datasheet Details

Part number AP22815
Manufacturer DIODES
File Size 665.86 KB
Description SINGLE CHANNEL POWER DISTRIBUTION SWITCH
Datasheet download datasheet AP22815 Datasheet
Additional preview pages of the AP22815 datasheet.

📁 Similar Datasheet

  • AP2201 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2201 - PFM Control Step-Up Switching Regulator (Chipown)
  • AP2202 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2203 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2204 - WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR (BCD Semiconductor)
  • AP2210 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2213 - LOW NOISE LDO REGULATOR (BCD Semiconductor)
  • AP2218 - LOW DROPOUT LINEAR REGULATOR (BCD Semiconductor)
  • AP22N13GH-HF - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
  • AP22T03GH-HF - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
Other Datasheets by Diodes
  • AP2281 - Single Slew Rate Controlled Load Switch
  • AP22811 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22814 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22816 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22817 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22818 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP2280 - Single Channel Slew Rate Controlled Load Switch
  • AP22800 - 5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH

Full PDF Text Transcription

Click to expand full text
AP22815 / AP22615 SINGLE CHANNEL POWER DISTRIBUTION SWITCH WITH OUTPUT OVP Description The AP22815/615 is a 3A single-channel current-limited high-side power switch with output OVP optimized for USB and other hot-swap applications, which must have overvoltage protection from output to protection the system. The AP22815/615 complies with USB standards and is available with both polarities of Enable input. AP22815 supports fixed current-limited feature, while AP22615 equips adjustable current-limited feature optimized for applications that require precision current limiting support. It supports USB PD3.0 fast role-swap function. The output voltage could recovery to USB valid voltage range within 110µs during USB PD fast role-swap event.
Published: |