DIM200WKS12-A000 Datasheet | Dynex Semiconductor

FEATURES 10µs Short Circuit Withstand Non Punch Through Silicon Isolated Copper Baseplate KEY PARAMETERS VCES (typ) VCE(sat)- (max) IC (max) IC(PK) 1200V 2.2V 200A 400A - (Measured at the power busbars and not the auxiliary terminals) APPLICATIONS I I I I I Choppers Motor Controllers Induction Heating Resonant Converters Power Supplies 4(G1) 5(E1) 1(K,E) 2(A) 3(C1) The Powerline range of high power modules includes half bridge, chopper, dual, single and bi-directional switch configurations covering voltages from 600V to 3300V and currents up to 3600A. The DIM200WKS12-A000 is a 1200V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) chopper module configured with the upper arm of the bridge controlled. The IGBT has a wide reverse bias safe operating area (RBSOA) plus full 10µs short circuit withstand. The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety. Fig. 1 Chopper circuit diagram ORDERING INFORMATION Order As: DIM200WKS12-A000 Note: When ordering, please use the whole part number. Outline type code: W (See package details for further information) Fig. 2 Electrical connections - (not to scale) Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures. 1/8 .dynexsemi. .. ABSOLUTE MAXIMUM RATINGS - PER ARM Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability. Tcase = 25˚C unless stated otherwise Symbol VCES VGES IC IC(PK) Pmax I2t Visol QPD Parameter Collector-emitter voltage Gate-emitter voltage Continuous collector current Peak collector...