Datasheet4U Logo Datasheet4U.com

EMP8165 - 2A Ultra Low Dropout Voltage Regulator

General Description

The EMP8165/A series can drive 2A of continuous output loading and provide a good performance with a typical dropout voltage as 185mV through an internal n-channel power MOSFETs.

The output voltage can be adjustable from 0.8V to Vout that could be very close to VIN.

Key Features

  • An internal soft-start or adjustable soft-start by SS pin can minimizes capacitive inrush current on the input power source during start-up. PG stay low until the output reaches 92% of value that is settled during start-up. Typical.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EMP8110 1.5A Fixed Voltage LDO Linear Regulator Elite Semiconductor
EMP8130 300mA CMOS Linear Regulator Elite Semiconductor
EMP8020 300mA CMOS Linear Regulator Elite Semiconductor
EMP8021 600mA CMOS Linear Regulator Elite Semiconductor
EMP8040 Low-Dropout Linear Regulator Elite Semiconductor

Other Datasheets by ESMT (Elite Semiconductor Microelectronics Technology)

Part Number Description
EMP8165A 2A Ultra Low Dropout Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ESMT EMP8165/A 2A Ultra Low Dropout Voltage Regulator with Internal Soft-Start (600uS) General Description The EMP8165/A series can drive 2A of continuous output loading and provide a good performance with a typical dropout voltage as 185mV through an internal n-channel power MOSFETs. The output voltage can be adjustable from 0.8V to Vout that could be very close to VIN. The EMP8165/A series are available in E-SOP-8L package. Applications  High Efficiency Linear Regulators  DSP Core and I/O Voltage  Post Regulator for Switching Power There are two power supplies pins for the linear regulator. The control circuitry in this linear regulator requires a supply VCTRL and the driver, the n-channel MOSFET, uses another one.