GE1084 Datasheet | GTM

Description Features Package Dimensions 1.5V maximum dropout at full load current Built-in thermal shutdown Output current limiting Adjustable output voltage or fixed 1.5V,1.8V,2.5V,3.3V,5.0V Fast transient response Good noise rejection REF. A b c D E L4 L5 Millimeter Min. Max. 4.40 4.80 0.76 1.00 0.36 0.50 8.60 9.00 9.80 10.4 14.7 15.3 6.20 6.60 REF. c1 b1 L e L1 Ø A1 Millimeter Min. Max. 1.25 1.45 1.17 1.47 13.25 14.25 2.54 REF. 2.60 2.89 3.71 3.96 2.60 2.80 Typical Circuit Block Diagram Pin Descriptions Name Adj (GND) Vout O I/O PIN# 1 2 Adjustable (Ground only for fixed mode) The output of the regulator. A minimum of 10u F capacitor must be connected from this pin to ground to insure stability. The input pin of regulator .Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response .This pin must always be 1.5V higher than Vout in order for the device to regulate properly. FUNCTION Vin Page: 1/4 ISSUED DATE :2003/08/01 REVISED DATE :2006/03/29D Absolute Maximum Ratings Symbol Vin PD TST TOP DC Supply Voltage Power Dissipation Storage Temperature Operating Junction Temperature Range Parameter Ratings -0.3 to 12 Internally Limited -65 ~ + 150 0 ~ + 150 Unit V Electrical Characteristics Symbol VREF Parameter GE1084ADJ GE1084-1.5 GE1084-1.8 Output Voltage GE1084-2.5 GE1084-3.3 GE1084-5.0 Line Regulation GE1084XXX GE1084ADJ GE1084-1.5 Load Regulation GE1084-1.8 GE1084-2.5 GE1084-3.3 GE1084-5.0 Vo ILIM IMIN IADJ IQ Dropout Voltage Current Limit Minimum Load Current Adjust Pin Current Quiescent Current Temperature Stability JA JC Thermal Resistance Junction-to-Ambient(No heat sink ;No air flow) Thermal Resistance Junction-to-Case Control Circuitry/Power Transistor Conditions(Notes) Io=10m A, Tj=25 Io=10m A, Tj=25 Io=10m A, Tj=25 Io=10m A, Tj=25 Io=10m A, Tj=25 Io=10m A, Tj=25 , (Vin-Vout )=1.5V , 3.0V Vin 12V , 3.3V Vin...