GE1085 Datasheet | GTM

Description Features 3-Terminal Adjustable or fixed 1.5V,1.8V,2.5V,3.3V,5.0V 1.4V Maximum Dropout at Full Load current Fast Transient response Built-in Thermal Shutdown Output current limiting Package Dimensions REF. A b c D E L4 L5 Millimeter Min. Max. 4.40 4.80 0.76 1.00 0.36 0.50 8.60 9.00 9.80 10.4 14.7 15.3 6.20 6.60 REF. c1 b1 L e L1 Ø A1 Millimeter Min. Max. 1.25 1.45 1.17 1.47 13.25 14.25 2.54 REF. 2.60 2.89 3.71 3.96 2.60 2.80 Typical Circuit 3.3V/3A 2.5V/3A Block Diagram Page: 1/4 ISSUED DATE :2005/06/01 REVISED DATE :2006/06/01B Pin Descriptions Name Adj (GND) Vout O I/O Pin# 1 2 Adjustable (Ground only for fixed mode) The output of the regulator. A minimum of 10u F capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.4V higher than Vout in order for the device to regulate properly. Function Vin Absolute Maximum Ratings Symbol Vin PD TST TOP DC Supply Voltage Power Dissipation Storage Temperature Operating Junction Temperature Range Parameter Ratings -0.3 to 12 Internally Limited -65 ~ + 150 0 ~ + 150 Unit V Electrical Characteristics Parameter Reference Voltage GE1085-ADJ GE1085-1.5 GE1085-1.8 Output Voltage GE1085-2.5 GE1085-3.3 GE1085-5.0 Line Regulator GE1085-XXX GE1085ADJ GE1085-1.5 Load Regulation GE1085-1.8 GE1085-2.5 GE1085-3.3 GE1085-5.0 Dropout Voltage (Vin-Vout) Current Limit Minimum Load Current Adjust Pin Current Quiescent Current Thermal Regulation Ripple Rejection Temperature Stability Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case GE1085-XXX GE1085-XXX Adjustable model Adjustable model fixed model TA=25 , 30ms pulse Vin=Vout+3V Conditions Io=10m A, TJ =25 Io=10m A, TJ =25 Io=10m A, TJ =25 Io=10m A, TJ =25 Io=10m A, TJ =25 Io=10m...